RefSmart Universal Game Day Umpire / Referee Timer

Description

Updated for the 2025 NCAA Baseball and Softball Season.

Be on top of your game with this Universal Game Day Timer by RefSmart – for baseball, football, lacrosse, and softball.

BASEBALL: Time the 20/120 second clocks between pitches and innings. Meets NCAA 2025 Action Clock Update.

FOOTBALL: Time the 25/40 or 25/60 second play clock used in High School and NCAA. Meets new NFHS Football timing rules started in 2019.

LACROSSE: Time defensive zone clearance and timeouts.

SOFTBALL: Time the 20/90 second clocks between pitches and innings. Meets NCAA 2024 & 2025 Rule Changes.

Features

• Compatible for baseball, football, lacrosse, and softball with 5-time settings
• Each timer mode comes with a sport-specific vibration warning.
• Tempered steel black powder coat belt clip is secure to stay in place during the most grueling conditions.
• Easy to use in all weather conditions.
• Unlike a wristwatch, there are no tiny buttons.
• Simple flip the toggle switch up to start the longer timer or down for the shorter
• 2 AAA batteries included
• Automatic 30-minute shut-off to conserve battery life
• Audible sound occurs when power on if the batteries need replacing
• 3 1/4″ x 2 3/8″ x 1 1/16″

Time Settings

• 20/120 (baseball) – Setting to easily time :20 between pitches and :120 between innings. The 20-second timer gives an initial vibration once engaged, then again at :08 remaining, then a long vibration when the timer reaches 0. The 120 second clock has a warning vibration with 30 seconds remaining and with 15 seconds remaining. Continuous vibration at 0:00.
• 25/40 (football) – Warning vibration with :25 remaining on the :40 play clock. The 25-second timer gives an intial vibration once engaged, then again at 10 seconds remaining, then vibrate in 1 second increments for the last 5 seconds. The 40-second play clock has a quick vibration warning with 25 seconds remaining, then with 10 seconds remaining. Continuous vibration at 0:00.
• 25/60 (football) – 60-second timer has a vibration warning 15 seconds remaining, then again when the timer reaches 0:00.
• 20/120 (lacrosse) – The 20-second defensive clearance clock has a quick vibration warning with 5 seconds remaining, then will vibrate in 1-second increments for the last 5 seconds. The 120-second timeout timer has a vibration warning 15 seconds remaining, then again when the timer reaches 0:00.
• 20/90 (softball) – Setting to easily time :20 between pitches and :90 between innings. The 20 second timer gives an initial vibration once engaged, then again at :10 remaining, :05 remaining, and a long vibration when the timer reaches 0. The 90 second clock has a warning vibration with 30 seconds remaining and with 15 seconds remaining. Continuous vibration at 0:00.
• NOTE: All timers come programmed at 20/90 Softball setting. Instructions to change the timer settings.